Features
■
20-μA Quiescent current in regulation
■
Input voltage range: 4V-60V
■
Output voltage range: 1V-VIN
■
Integrated upper and lower power MOSFET
maximum current: 5A
■
Adjustable frequency range: 200KHz~2MHz
■
Automatic switching of CCM/DCM/PFM mode
■
Adjustable soft-start time and Output voltage
tracking capability
■
Automatically switched bypass linear power
supply
■
Provides ultra-low input and output dropout
voltage close to 100% duty cycle
■
Internal Compensation
■
Power-good flag
■
Dynamic Frequency Stretch Technology
■
Support large capacitive load start-up
■
Protection function: UVLO/OCP/SCP/OTP/OVP
■
Operating junction temperature range: -40℃ to
+125℃
■
All pins have ±2000V (HBM) ESD protection
■
ETSSOP 16-Pin Exposed Pad Package
Applications
■
Industrial power supply
■
Wide voltage input range power supply
■
Low ripple low noise power supply
■
Automotive electronic power supply
Figure. 1 Typical Application Circuit
Description
ZCC5160 is a step-down DC/DC regulator with an
internal switch, featuring SKIP control mode, which
combines low quiescent current with high switching
frequency to achieve high-efficiency regulation over a
wide range of load currents. SKIP mode uses a short
"burst" cycle to switch the inductor current through
the internal power MOSFET, followed by a sleep
cycle in which the power switch is turned off and the
load current is provided by the output capacitor. At
light loads, burst cycles are a small fraction of the
total cycle time, minimizing average supply current
and greatly improving efficiency at light loads.
ZCC5160 has a wide input voltage range of 4V-60V,
thus minimizing the need for external surge
suppression components. Making it the best choice
for wide input power range industrial and high cell
count battery pack applications. ZCC5160 is ideal for
use in the 48V automotive power bus range.
ZCC5160 features low-value 100mΩ high-side and
80mΩ low-side MOSFET that provide at least 3A
output current capability with excellent load and line
transient response.
Additional features include: soft-start, thermal
shutdown, UVLO undervoltage lockout, gate driver
undervoltage lockout, maximum duty cycle limit timer,
and current limit shutdown timer. It also integrates
output short-circuit protection, providing HICCUP
mode when the FB voltage is low to avoid
overheating during short-circuit.