国产毛片a精品毛-国产毛片黄片-国产毛片久久国产-国产毛片久久精品-青娱乐极品在线-青娱乐精品

Powerint PFS708EG 150W PFC LED街燈照明解決方案

發布時間:2012-6-13 11:45    發布者:1770309616
關鍵詞: LED , PFC , PFS708EG , Powerint , 街燈照明
Powerint公司的PFS704-729EG HiperPFS系列集成了連續導通模式(CCM)升壓PFC控制器,柵極驅動器和高壓功率MOSFET,采用小型eSIP功率封裝.器件滿足EN61000-3-2 Class C和D,從10%到滿負載的效率大于95%,230VAC無負載輸出穩壓時的功耗小于130mW,230VAC無負載時遙控狀態時的功耗小于50mW,可提供高達1kW的峰值輸出功率,主要用于PC,大功率適配器,打印機,大功率LED照明,LCD TV,工業和電器設備,視頻游戲控制臺和通用PFC轉換器.本文介紹了PFS704-729EG HiperPFS系列產品亮點,方框圖,多種應用電路以及90 VAC - 265 VAC輸入48V/150W LED街燈照明參考設計主要指標,電路圖和材料清單于PCB布局圖.

The HiperPFS device family members incorporate a continuous conduction mode (CCM) boost PFC controller, gate driver, and high voltage power MOSFET in a single, low-profile eSIP™ power package that is able to provide near unity input power factor. The HiperPFS devices eliminate the PFC converter’s need for external current sense resistors, the power loss associated with those components, and leverages an innovative control technique that adjusts the switching frequency over output load, input line voltage, and even input line cycle. This control technique is designed to maximize efficiency over the entire load range of the converter, particularly at light loads. Additionally, this control technique significantly minimizes the EMI filtering requirements due to its wide-bandwidth spread spectrum effect. HiperPFS includes Power Integrations’ standard set of comprehensive protection features, such as integrated soft-start, UV, OV, brown-in/out, and hysteretic thermal shutdown. HiperPFS also provides cycle-by-cycle current limit for the power MOSFET, power limiting of the output for over-load protection, and pin-to-pin short-circuit protection.

HiperPFS’s innovative variable-frequency continuous conduction mode of operation (VF-CCM) minimizes switching losses by maintaining a low average switching frequency, while also varying the switching frequency in order to suppress EMI, the traditional challenge with continuous-conduction-mode solutions. Systems using HiperPFS typically reduce the total X and Y capacitance requirements of the converter, the inductance of both the boost choke and EMI noise suppression chokes, reducing overall system size and cost. Additionally, compared with designs that use discrete MOSFETs and controllers, HiperPFS devices dramatically reduce component count and board footprint while simplifying system design and enhancing reliability. The innovative variable-frequency, continuous conduction mode controller enables the HiperPFS to realize all of the benefits of continuous-conduction mode operation while leveraging low-cost, small, simple EMI filters.

Many regions mandate high power factor for many electronic products with high power requirements. These rules are combined with numerous application-specific standards that require high power supply efficiency across the entire load range, from full load to as low as 10% load. High efficiency at light load is a challenge for traditional PFC approaches in which fixed MOSFET switching frequencies cause fixed switching losses on each cycle, even at light loads. HiperPFS simplifies compliance with new and emerging energy-efficiency standards over a broad market space in applications such as PCs, LCD TVs, notebooks, appliances, pumps, motors, fans, printers, and LED lighting.

HiperPFS advanced power packaging technology and high efficiency simplifies the complexity of mounting the package and thermal management, while providing very high power capabilities in a single compact package; these devices are suitable for PFC applications from 75 W to 1 kW

PFS704-729EG HiperPFS系列產品亮點:

Protected Power Factor Correction Solution

• Incorporates high-voltage power MOSFET, controller, and gate driver

• EN61000-3-2 Class D compliance

• Integrated protection features reduce external component count

• Accurate built-in brown-in/out protection

• Accurate built-in undervoltage (UV) protection

• Accurate built-in overvoltage (OV) protection

• Hysteretic thermal shutdown (OTP)

• Internal power limiting function for overload protection

• Cycle-by-cycle power switch current limit

• No external current sense required

• Provides “lossless” internal sensing via sense-FET

• Reduces component count and system losses

• Minimizes high current gate drive loop area

• Minimizes output overshoot and stresses during start-up

• Integrated power limit and frequency soft start

• Improve dynamic response

• Input line feed-forward gain adjustment for constant loop gain across entire input voltage range

• Eliminates up to 40 discrete components for higher reliability and lower cost

Intelligent Solution for High Efficiency and Low EMI

• Continuous conduction mode PFC uses novel constant volt/ amp-second control engine

• High efficiency across load using a UF boost diode

• Low cost EMI filter

• Universal input device (PFS704 – PFS716) utilize frequency sliding technique for light load efficiency improvements

• >95% efficiency from 10% load to full load at low line input voltage

• >96% efficiency from 10% load to full load at high line input voltage

• High line input device (PFS723 – PFS729) maintain higher average switching frequency to minimize boost inductance and core size

• >94% efficiency from 10% load to full load

• Variable switching frequency to simplify EMI filter design

• Varies over line input voltage to maximize efficiency and minimize EMI filter requirements

• Varies with input line cycle voltage by >60 kHz to maximize spread spectrum effect

Advanced Package for High Power Applications

• Up to 1 kW peak output power capability in a highly compact package

• Simple clip mounting to heat sink

• Can be directly connected to heat sink with insulation pad

• Provides thermal impedance equivalent to a TO-220

• Staggered pin arrangement for simple routing of board traces and high voltage creepage requirements

• Single package solution for PFC converter reduces assembly costs and layout size

Key Benefits

• Single chip solution for boost power factor correction (PFC)

• EN61000-3-2 Class C and D compliant

• High light load efficiency at 10% and 20% load

• >95% efficiency from 10% load to full load

• <130 mW no-load consumption at 230 VAC with output in regulation

• <50 mW no-load consumption at 230 VAC in remote off state

• Frequency adjusted over line voltage, and line cycle

• Spread-spectrum across >60 kHz window to simplify EMI filtering requirements

• Lower boost inductance

• Provides up to 1 kW peak output power

• >1 kW peak power delivery in power limit voltage regulation mode

• High integration allows smaller form factor, higher power density designs

• Incorporates control, gate driver, and high-voltage power MOSFET

• Internal current sense reduces component count and system losses

• Protection features include: UV, OV, OTP, brown-in/out, cycle-by-cycle current limit, and power limiting for overload protection

• Halogen free and RoHS compliant

PFS704-729EG HiperPFS應用:

• PC

• High power adaptors

• Printer

• High power LED lighting

• LCD TV

• Industrial and appliance

• Video game consoles

• Generic PFC converters

圖1.PFS704-729EG HiperPFS系列框圖

圖2.采用PFS714EG的347W PFC電路圖

圖3.采用PFS708EG的180W PFC電路圖

圖4.采用PFS729EG的900W PFC電路圖

90 VAC - 265 VAC輸入48V/150W LED街燈照明參考設計

This engineering report describes a 48 V, 150 W reference design power supply for 90 VAC - 265 VAC LED street lights which can also serve as a general purpose evaluation board for the combination of a PFS power factor stage with an LCS output stage using devices from the Power Integration’s HiperPFS and HiperLCS device families.

The design is based on the PFS708EG IC and LQA05TC600 diode for the PFC front end, with a LNK302 utilized in a non-isolated flyback bias supply. An LCS702HG IC is used for the LLC output stage.


圖4. 150W LED街燈照明參考設計外形圖:上圖,正面;下圖,底面

150W LED街燈照明參考設計主要特性:

 Integrated PFC stage using

o PFS708EG from HiperPFS family of ICs

o LQA05TC600 ultrafast soft recovery QSpeed diode

 Integrated LLC stage using

o LCS702HG from HiperLCS family of ICs

 Simple snubberless bias supply using

o LNK302DG from LinkSwitch-TN family of ICs

 CAPZero (CAP002DG) IC used to discharge X capacitors for higher efficiency compared to resistive solution

 High frequency (250 kHz) LLC for small transformer size

 >95% full load PFC efficiency at 115 VAC

 >95% full load LLC efficiency

 System efficiency 91% / 93% at 115 VAC / 230 VAC

150W LED街燈照明參考設計性能指標:


圖6. 150W LED街燈照明參考設計RD-292電路圖(1):輸入濾波器,PFC功率級和偏壓電源

圖7. 150W LED街燈照明參考設計RD-292電路圖(2)LC級

150W LED街燈照明參考設計RD-292材料清單:




圖8. LLC變壓器(T2)電路圖

圖9. 150W LED街燈照明參考設計RD-292 PCB布局圖:頂層

圖10. 150W LED街燈照明參考設計RD-292 PCB布局圖:底層
詳情請見:
hiperpfs_family_datasheet[1].pdf (2.84 MB)
rdr292[1].pdf (7.87 MB)

來源:網絡
本文地址:http://www.qingdxww.cn/thread-92808-1-1.html     【打印本頁】

本站部分文章為轉載或網友發布,目的在于傳遞和分享信息,并不代表本網贊同其觀點和對其真實性負責;文章版權歸原作者及原出處所有,如涉及作品內容、版權和其它問題,我們將根據著作權人的要求,第一時間更正或刪除。
您需要登錄后才可以發表評論 登錄 | 立即注冊

廠商推薦

  • Microchip視頻專區
  • Dev Tool Bits——使用MPLAB® Discover瀏覽資源
  • Dev Tool Bits——使用條件軟件斷點宏來節省時間和空間
  • Dev Tool Bits——使用DVRT協議查看項目中的數據
  • Dev Tool Bits——使用MPLAB® Data Visualizer進行功率監視
  • 貿澤電子(Mouser)專區

相關在線工具

相關視頻

關于我們  -  服務條款  -  使用指南  -  站點地圖  -  友情鏈接  -  聯系我們
電子工程網 © 版權所有   京ICP備16069177號 | 京公網安備11010502021702
快速回復 返回頂部 返回列表
主站蜘蛛池模板: 亚洲网站在线免费观看 | 91video | 亚洲嫩草影院在线观看 | 亚洲国产精品激情在线观看 | 欧美资源网 | 国产系列 视频二区 | 欧美精品免费线视频观看视频 | 中国xxxxx高清免费看视频 | 日本色综合 | 免费视频精品一区二区 | 亚洲人成综合 | 国内外成人在线视频 | 四虎国产视频 | 欧美一区二区在线观看免费网站 | 99久久老司机免费精品免费 | 精品福利视频网 | 国产精品久久久久免费 | 成人欧美一区二区三区视频xxx | 99爱这里只有精品 | 亚洲第一成年免费网站 | 日本中文字幕在线观看视频 | 成人a在线| 亚洲六月丁香六月婷婷花 | 男人的天堂久久精品激情a 男人的天堂久久精品激情 男人的天堂久久 | 伊人婷婷| 日韩一区二区视频 | 日本精品久久久久中文字幕2 | 日韩免费精品 | 呦视频在线一区二区三区 | 日本人在线看片 | 亚洲男人在线天堂 | 国产精品久久久久久久毛片 | 麻豆理论片 | 97在线观看免费 | 特黄特色大片免费视频大全 | 成人人观看的免费毛片 | 日一区二区三区 | 性88分钟| 欧美一区亚洲二区 | 色综合天天综合网国产人 | 欧美一级久久久久久久大片 |